This is the second iteration of the design. As I described in the previous post, I added a PVC pipe around the steering column. The bottom of the pipe is screwed into the front of the cart. The motor mount is screwed into the PVC pipe and stabilized with two hose clamps.

IMG_1767.JPG
The bottom of the steering column. (I apologize for the terrible image quality)

After about a week of engineering, the steering mechanism finally works! Now we can steer the vehicle electronically. A giant step for this project!

(I apologize for the bad video quality)

12 thoughts on “The Steering Hardware Works!

Leave a Reply to NeilNie Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s